[slaughterj]

I've uploaded a revised version of my viper fluids maintenance sheet, which now includes info on fluid change durations for you garage queen owners (e.g., oil every 6 months, etc.):

www.yandros.com/Viper/ViperFluids.htm

I'm also considering making a supplemental sheet with info on:
Source for the particular products, Container Capacity (i.e., # to buy), Shelf Life, and Cost - any other categories I should include? Anyone got info on shelf life for the various fluids?

Additionally, I'm also considering making a sheet on non-fluid common maintenance items, including:
Spark Plugs, Spark Plug Wires, Air Filter (stock & K/N – clean vs. replace), Tires, Fuel Filter, Brake Pads (stock, EBC green), Battery, Door Hinges, PCV Valves, Inspect Brake Linings (what does the service manual mean by this?), Lubricate Front and Rear Ball Joints and Tie Rod Ends (varying times – SM), Auto Tensioning Drive Belt (Serpentine Belt) - anything else that should be included?

 

[Chip]

WHy do they have a 7.6L motor, was that in the GEN 1?

 

[PRVT JET]

Thats just the measurement for the fluid, not the engine size.

 

[slaughterj]

As PRVT JET said, the 7.6L is the amount of engine oil required - it is the same as 8 Qts, and 8.0L = 8.5 Qts which is the engine oil with the oil filter too. Maybe I should just list the Qts, but then what about the non-American owners?!

 

[PRVT JET]

As PRVT JET said, the 7.6L is the amount of engine oil required - it is the same as 8 Qts, and 8.0L = 8.5 Qts which is the engine oil with the oil filter too. Maybe I should just list the Qts, but then what about the non-American owners?!

If you did that, then they would ask you about Liters.