Dodge SRT Viper Forums : ViperAlley banner

1 - 11 of 11 Posts

·
Registered
Joined
·
548 Posts
I know it's not exactly what you are looking for, you could take the old ones and weld the two halves together to make them solid.
 

·
Landscaping Professional
Joined
·
13,908 Posts
Solid motor mounts will cause massive engine vibrations to transmit through the frame. Eventually, it will cause a cracked frame, or worse - a cracked block at the motor mount bosses. Don't do it.
 
  • Like
Reactions: RobV and 8.0L>1.8T

·
Kitty Wrangler Denali Owner
Joined
·
8,509 Posts
I replaced my motor mounts under 30k miles. They were all jacked up, they did thier job absorbing the abuse that would have otherwise jacked up the frame.

Good luck fucking up your Viper.
 

·
Registered
Joined
·
556 Posts

Do the tranny mount too...
 

·
Premium Member
Joined
·
1,864 Posts
Solid motor mounts will cause massive engine vibrations to transmit through the frame. Eventually, it will cause a cracked frame, or worse - a cracked block at the motor mount bosses. Don't do it.
Exactly. search the forum and you will see me saying the same thing as Dean.

Race cars life span are different.
 
1 - 11 of 11 Posts
Top