Dodge SRT Viper Forums : ViperAlley banner
1 - 6 of 6 Posts

·
Premium Member
Joined
·
634 Posts
Discussion Starter · #1 ·
Got it done finally, sorry I took so long to get back to you. I have just been way busy. 6 cars in here now so I'm gonna keep it short. I will attach a few pics of the pipe exit. The headers look the same as Gen 2's when on the car.Sounds really nice and throaty at idle and when revving. It is a little on the loud side when at full throttle, boarder on too loud but that may be up for personal opinion. Not a real fun install but reasonably easy. I will charge more for this install than I do for Gen2. Good fit, looks OK, sound good, I don't care for the look of the exit tips!

David
 

·
Registered
Joined
·
12,999 Posts
the tips suck! where is the chrome? hello? nice tips? hello? :doh: david, im going to try and get down to austin again soon and check out the stuff you have going on. i appreciate you letting me stop in last week :bowdown:
 

·
Premium Member
Joined
·
634 Posts
Discussion Starter · #4 ·
You are welcome anytime. I will be off for a week in June so call me before you come down. I need a vacation bad! I am beginning to suffer from Viper burnout! And I don't mean tires! The tips need some work. I am not impressed! See ya

David
 

·
Premium Member
Joined
·
634 Posts
Discussion Starter · #6 ·
fixumm said:
David Weaver Thanks for the update... if you have time what all did you have to remove to put this stuff on.

Thanks fixumm /images/graemlins/gasthrower.gif
Not much more than a usual install. The side sills are quite a bit different but now they use a much better fastener than previous years, won't strip out and fall out under your tires! Dodge made the exhaust hanger brackets adjustable so I had to hang the exhaust, install the sill, remove the sill, adjust the hangers a few times. It is a little tighter than GEN2 but the manifolds will come out the top. I pulled the valve covers so I wouldn't hit them and chip the paint. That's about it.

David
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top