Dodge SRT Viper Forums : ViperAlley banner
1 - 6 of 6 Posts

·
Registered
Joined
·
324 Posts
Ross or JE pistons $800-900
Crower billet rods $1600
I priced them a few months back, and they are for 488cid to 494cid with 30 over pistons..
 

·
Registered
Joined
·
245 Posts
Matt,

As long as you are going to do the build, you might think about billet main caps. Billet steel caps are about $750 but you will need to align bore the block too. With > 850hp on tap, caps would be good insurance. If you do all this, the crank then becomes the weakest link. A billet crank will cost $3500 but you can have it built to any stroke you want. By going to 4.25" stroke with the 30 over pistons, you could build a 542. Add that to your SC for one wild ride! /images/graemlins/drive
 

·
Registered
Joined
·
7,273 Posts
Go Fast is right - don't neglect the crank - the stock one is at the limit now.

Personally I'd not go past 510 for boost, but then I like to rpm. If you're happy to keep it to 5500rpm, a boosted 542 stroker will work nicely.
 
1 - 6 of 6 Posts
Top