[V10 MOJO]

im going to be doing an engine project, from cosmetic to performance. as for the cosmetic, its a color change and red magnecors just wont work, i need blue or green. any suggestions or input?

 

[Mister Bone]

Some companies make a heat sleeve that goes over the wires. You can just buy them in the color you would like.

Try www.jegs.com or www.summitracing.com

 

[V10 MOJO]

heat sleeve for plug wires?? is it like the kind spectre does for hoses? if so they look cheap

 

[Mister Bone]

These are real protective sleeves. No ricer shit here. They protect from heat, liquids, and rubbing. Some even protect from RFI.

Let me see if I can find them for you.

 

[Mister Bone]

Here is the MSD brand.

[image]http://www.jegs.com/photos/1213408.jpg[/image]

http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=2775&prmenbr=361



Accel

[image]http://www.jegs.com/photos/110170071.jpg[/image]

http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=3025&prmenbr=361


Moroso

[image]http://www.jegs.com/photos/71072000.jpg[/image]
[image]http://www.jegs.com/photos/71072002.jpg[/image]

http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=3618&prmenbr=361

 

[V10 MOJO]

thnx much that helps. seeing as the colors im using will not be standard this will help alot, thanx bro

 

[Mister Bone]

You got it. :thumb:

If you need another color let me know and I will see what I can come up with.

 

[RUCKDR]

Hi,
Make sure it will fit your wire diameter.
MSD does not specify the diameter it fits;
Accel specifies 8.8 mm diameter;
Moroso specifies 7 mm and 8 mm diameter.
Your wires should be 8.5 or 10 mm.
Later,

 

[Super Squirrel]

Anyone have a picture of these on the car? Post it if it's possible