Dodge SRT Viper Forums : ViperAlley banner
1 - 4 of 4 Posts

·
Registered
Joined
·
215 Posts
Discussion Starter · #1 ·
My 85 monte carlo has a 305 and an edelbrock performer and 600 cfm carb. The electronic choke on it sticks and this makes the it idle around 2000 rpms. Anybody know how to adjust it? I sprayed it with carb cleaner and that doesn't help.
 

·
Premium Member
Joined
·
5,026 Posts
Is the choke actuator signal going on and off like it should be ? With the car off, open and close it by hand to see if it feels like it is sticking or binding.
 

·
Registered
Joined
·
5,362 Posts
SuprSlow said:
My 85 monte carlo has a 305 and an edelbrock performer and 600 cfm carb. The electronic choke on it sticks and this makes the it idle around 2000 rpms. Anybody know how to adjust it? I sprayed it with carb cleaner and that doesn't help.
Maybe the choke is bad. You can remove it and see if the butterfly moves freely.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top