Dodge SRT Viper Forums : ViperAlley banner
1 - 1 of 1 Posts

·
Registered
Joined
·
144 Posts
I cut my coils. People seem to be against that these days, but there's nothing wrong with it if you do it right. 2 coils front, 1coil back dropped my car 1 1/2" on average. Looks NASTY! Front spoiler is less that 2" off the ground. This will also increase your spring rate to almost that of the eibachs, and you lose some progressiveness. I dialed 1 turn on my konis front and rear, but my rear is too tight. My friend whos been racing Beemers for 20 years suggested going full 1 1/2 up front, but the ride is already rough on the street, so I'll probably drop to 1/2 turn on the rear instead. Look at SnakeBitten's setup. He's also trying to compensate for all that torque.

If I was going to do it again, I'd go with the 1/2" lowering caps first. This may be enough for you to get that look without having to go to stiffer springs. Don't forget the allignment.

Good luck. I know its hard to get good tech on this site.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top