Dodge SRT Viper Forums : ViperAlley banner
1 - 1 of 1 Posts

·
Registered
Joined
·
832 Posts
Sorry to hear about your father and welcome to Viper ownership.

Not familiar with the 2004, but I know with the Gen1/2's it's not uncommon at all for the wire harness between the door and the body of the car to get fragile break over time, especially if the door is opened fully often. I would first check that the fuse is good. Then after that I would pull the door panel and get to the switch harness and ensure you are getting 12v to the switch. If not, start at the door wire harness. If you are getting it then it's probably a bad switch. Check for continuity before buying a new switch. My gut tells me you aren't getting 12V to the switch.
 
1 - 1 of 1 Posts
Top