Dodge SRT Viper Forums : ViperAlley banner
1 - 5 of 5 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Does anyone know if the fittings on the a 2000 GEN II oil cooler are NPT or AN. Mine was wiped out in a front end accident. The hoses survived, and I know I can fabricate up one with a good aftermarket oil cooler, its just those fittings.
Any and all help will be appreciated...Hopefully this beast will be back on the road with in a few months...Before and after pics will be included..
Thanks everyone..
 

·
Registered
Joined
·
94 Posts
Does anyone know if the fittings on the a 2000 GEN II oil cooler are NPT or AN. Mine was wiped out in a front end accident. The hoses survived, and I know I can fabricate up one with a good aftermarket oil cooler, its just those fittings.
Any and all help will be appreciated...Hopefully this beast will be back on the road with in a few months...Before and after pics will be included..
Thanks everyone..
It's an-10, but into the aluminum filter housing is NPT.

-Dave.
 

·
Premium Member
Joined
·
1,989 Posts
Anyone confirm the size of the fitting on the oil cooler and the filter housing and the connector type?
JIC 37 flare (7/8") or AN 37 flare (AN-10).
And I thought it is a ORB not a NPT (size too please).
 
1 - 5 of 5 Posts
Top