Dodge SRT Viper Forums : ViperAlley banner
1 - 1 of 1 Posts

·
Registered
Joined
·
293 Posts
Discussion Starter · #1 ·
I saw the other thread about the Gen 2 Seats in a Gen 1 so I thought I would let you guys know what I found from Gen 3 to Gen 2. I was told that the Gen 3 SRT seats fit in the Gen 2 and just bolt right in. That is not the case. The rear mounts are a 1/2 inch off which can be modified pretty easy. The fronts however are totally off and the bracket is sloped on the Gen 3. We are going to get them in, but we also found that the Gen 3 seats are longer so the leg room is not good at all. I am 6'2 and my left knee is going to relocate a little from my past 5 years driving vipers. It may be a little to get use to. FYI most of the people selling the Gen 3 seats claim the bolt straight in, they want to make the sale, then never return your emails. Hope this helps if you thought about doing this.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top