Dodge SRT Viper Forums : ViperAlley banner
1 - 19 of 19 Posts

·
Supporting Vendor
Joined
·
4,047 Posts
Discussion Starter · #1 ·
The following systems are available for the Paxton SC kit and can also be addapted to the Roe SC package:

Stage 1 - up to 750 rw hp
Includes:
External fuel rails (chromed)
Top-feed fuel injectors
In-tank Walbro fuel pump upgrade
Modified fuel pump sending unit
-6 Return fuel line
All A/N fittings and steel braided hose
Cost: $2,495

Stage 2 - up to 1000 rw hp
Includes:
External fuel rails (chromed)
Top-feed fuel injectors
External Aeromotive fuel pump with mounting bracket
Aeromotive fuel filter system
-10 Fuel feed line
-8 Return fuel line
All A/N fittings and steel braided hose
Cost: $3,795

We are building 10 of the stage 1 systems and 5 of the Stage 2 systems now and should begin shipping them by the 2nd week in January. All you need to do to order is call or email/PM me. No money is required to order - we simply ship COD.

The stage 1 system can be done as a DIY and will have detailed instructions. The stage 2 system is a bit more sophisticated but still can be installed by the serious DIY'er. I would suggest that in most cases you are better off to have a professional tech do the installation work. Also, you will need access to a Dynojet with a wideband.

These are nearly the same systems we use on our Venom twin turbo systems and they are proven to make reliable, driveable power.

We dont plan to offer any fuel systems for Gen 1 since its fuel system is quite different from the Gen 2.

These systems can also be ordered from and installed by Larry Macedo in FL, David Weaver in TX and Mike Adams in Canada.

I welcome any comments and questions that you may have.
 

·
Registered
Joined
·
134 Posts
John is sending me up a system which I will run with my paxton. I will post pictures and results. After my conversation with John this is going to be one kick ass system. It works on his turbo cars it will work on your Paxton.
 

·
Registered
Joined
·
1,974 Posts
?? You can buy eveything listed except the braket for the fuel pump and injectors from summit. How are you going to manage the injectors? What kind of injectors and the flow rate? You better also get the voltage regulator with the Aeromotive fuel pump as I hear they overheat and shut down.
 

·
Registered
Joined
·
1,251 Posts
dansauto said:
?? You can buy eveything listed except the braket for the fuel pump and injectors from summit.
Uh, I don't think so. You can't buy the fuel rails, nor the braided hose (cut to fit with AN fittings) from Summit.

Maybe what you meant to say was all you can buy from Summit is the Aeromotive fuel pump and some of the pieces to make the rest.
 

·
Registered
Joined
·
1,974 Posts
GaryA said:
dansauto said:
?? You can buy eveything listed except the braket for the fuel pump and injectors from summit.
Uh, I don't think so. You can't buy the fuel rails, nor the braided hose (cut to fit with AN fittings) from Summit.

Maybe what you meant to say was all you can buy from Summit is the Aeromotive fuel pump and some of the pieces to make the rest.
yes, you are correct, can't buy rails, can buy hose and fittings You can buy rails from Reichard Racing.
 

·
Registered
Joined
·
1,251 Posts
Heffner uses a different source for the fuel rails now. Jason originally had Reichard Racing design the fuel rails for him, but it took way too long to manufacture them. There was also an issue with some of the rails leaking.
 

·
Registered
Joined
·
251 Posts
John Hennessey said:
DansAuto - we can sell you fuel rails at $950 per pair. We have several sets in stock. Good luck with your project!
I may fucking die laughing, Yeah Dan send him $1900 and you will get your fuel rails or else you could play the lottery with your $1900.
 

·
Premium Member
Joined
·
523 Posts
ACELLR8 said:
John Hennessey said:
Hey Ed - fuck off.

The fuel rails are $950 per SET and available COD.
Good Comeback!!
I don't see why you have to knock John. He is trying to help out here and the way he is doing business is pretty much risk free with the COD option.

John has been friendly and he is very knowledgable of what he does just like many other tuners are. I think the comment you made above was not necessary about the lottery and sort. Just my two cents.
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top