Dodge SRT Viper Forums : ViperAlley banner
1 - 12 of 12 Posts

·
Registered
Joined
·
3,579 Posts
Discussion Starter · #1 ·
the actual projected release date of the new coupe?
 

·
Banned Since 2003
Joined
·
17,833 Posts
All-new 2006 Dodge Viper SRT10 Coupe “Tops Off” Viper Line, Continues Viper Tradition of Power and Performance

Los Angeles, Jan 05, 2005
500/500/500 cubic inches, horsepower and torque on tap – with a top


SRT Performance: 0-60 mph in less than 4 seconds, 60-0 mph braking in less than 100 feet, 0-100-0 mph in low 12-second range


Hardtop 2006 Dodge Viper SRT10 offers racing, autocross enthusiasts new alternative
The Dodge Viper legend began with the 1992 Dodge Viper RT/10 Roadster and grew with the introduction in 1996 of the Dodge Viper GTS Coupe.

History is repeating itself.

When the third-generation Dodge Viper made its debut in 2003, it did so in the form of a convertible. For 2006, the Dodge Viper SRT10 debuts in an all-new Coupe form – to the acclaim of “Viper Nation,” the community of die-hard Viper owners throughout the world.

“Demand for a Dodge Viper Coupe started the day we introduced the Dodge Viper SRT10 Convertible for 2003,” said Dan Knott, Director, Street and Racing Technology (SRT), Chrysler Group. “The all-new 2006 Dodge Viper SRT10 Coupe is a natural evolution of the heritage of the Dodge Viper, and gives enthusiasts exactly what they’re looking for in the ultimate American sports car.

“Dodge Viper SRT10 customers want to go beyond the level of the regular enthusiast, to the level of outrageous performance,” said Knott. “Our all-new 2006 Dodge Viper SRT10 Coupe gives our customers that performance in a stunning new package.”

Dodge Viper SRT10 is about uncompromising performance and stunning looks. With an 8.3-liter 500-horsepower V-10 engine contributing to blistering acceleration (0-60 mph in less than 4 seconds, 0-100-0 mph in the low 12-second range), and a bold appearance marked by Dodge’s signature crosshair grille design, deep-cut side scallops, swept-back fenders and lowered hood lines, the Dodge Viper SRT10 Convertible had no equal. Until now.

2006 Dodge Viper SRT10 Coupe Exterior
The exterior design of the all-new 2006 Dodge Viper SRT10 Coupe, with its “double-bubble” roof and dramatic, unique rear styling with wrap-around taillamps reminiscent of the Viper GTS Coupe, is what sets it apart from its Convertible sibling – and connects it to the Viper heritage.

“It was important for us to sustain the emotion in the design,” said Trevor Creed, Senior Vice President, Design, Chrysler Group. “We wanted the 2006 Dodge Viper SRT10 Coupe design to include a nod to the original Viper GTS Coupe, but in a contemporary way.

“The Dodge Viper SRT10 Coupe owner is often a racer, and the car has to scream that, even when it’s idling at the stoplight,” Creed added. “The bottom line is that the new Dodge Viper SRT10 Coupe’s design says a lot about its unique character, and the car’s performance is the payoff.”

In many cases, a convertible is derived from a coupe. After the coupe’s top is removed, structural reinforcements must be added to regain torsional stiffness lost with the deletion of the roof structure.

In the case of the 2006 Dodge Viper SRT10 Coupe, the starting point was the Dodge Viper SRT10 Convertible, which has a stout structure to begin with. With the addition of the roof structure, the Viper SRT10 Coupe becomes even more torsionally rigid than the Convertible.

From an aerodynamic standpoint, the all-new 2006 Dodge Viper SRT10 Coupe is designed for increased downforce and high-speed stability, with a sloping roofline and decklid spoiler.


The only bodywork that the Dodge Viper SRT10 Coupe shares with the Convertible is the front fascia and fenders, hood and doors. In addition to the new canopy and decklid, the 2006 Dodge Viper SRT10 Coupe has a special windshield surround, door side glass, rear fascia, quarter panels and taillights.

The decklid for the Dodge Viper SRT10 Coupe was designed for customer convenience as well as structural integrity. The decklid opening is deeply integrated into the rear fascia, which offers a low lift-over height for stowing cargo. Gas struts hold the decklid in place when open; when closed, the decklid is secured with a lock that meets federal regulations for latch safety.

The 2006 Dodge Viper SRT10 Coupe design also took some of its cues from Dodge Viper’s heritage. For example, the Center High-Mounted Stop Light (CHMSL) on the decklid, although all-new for 2006, looks similar to the “snake-head” design on the Viper GTS of 1996-2002.

The 2006 Dodge Viper SRT10 Coupe will be available initially in Viper Blue with twin Stone White racing stripes, harkening back to one of the most popular Vipers ever, the 1996 Dodge Viper GTS.

2006 Dodge Viper SRT10 Coupe Interior
The form-follows-function strategy continues inside the 2006 Dodge Viper SRT10 Coupe.

“For helmet clearance, we brought back the ‘double-bubble’ roofline from the original Dodge Viper GTS,” said Creed. “In fact, we began the process by utilizing a mannequin with a helmet to determine the height and shape of the roof.”

Another functional interior feature for the many owners who will take their 2006 Dodge Viper SRT10 Coupe racing is the roof and headliner structure that offers room to accommodate a safety cage, while maintaining as much headroom as possible.

Dodge Viper SRT10 Coupe-unique interior pieces also include various weatherstrip pieces, headliner, carpet and trim panels.

A result of the 2006 Dodge Viper SRT10 Coupe’s configuration is more usable trunk space – 4 cubic feet more than the Viper SRT10 Convertible, for a total of 6.25 cubic feet.

The 2006 Dodge Viper SRT10 Coupe also features a unique two-tone interior color scheme.

2006 Dodge Viper SRT10 Coupe Powertrain
The magic numbers for the Dodge Viper SRT10 are 500/500/500 – representing 500 horsepower, 525 pound-feet of torque and 505 cubic inches of displacement.

An aluminum-block 8.3-liter (505 cu. in.) V-10 engine powers the 2006 Viper SRT10 Coupe, generating 500 horsepower (372 kW) and 525 lb.-ft. (712 N•m) of torque. Ninety percent of the torque is available to the driver across a wide band -- the 1,500-5,600 rpm range.

Transferring the Dodge Viper SRT10’s power to the rear wheels is a heavy-duty six-speed manual transmission.

2006 Dodge Viper SRT10 Coupe Braking
Dodge Viper SRT10 Coupe braking power is defined by Brembo 44/40 dual opposing piston calipers in the front and Brembo 42/38 dual opposing calipers in the rear, gripping four 14-inch rotors. An anti-lock braking system (ABS) prevents lockup during hard braking.

This system results in a world-class braking performance of 60-0 mph in less than 100 feet, and completion of SRT’s signature 0-100-0 mph test in the low 12-second range.

2006 Dodge Viper SRT10 Coupe Ride and Handling
Handling and ride characteristics for the 2006 Dodge Viper SRT10 Coupe is derived from a race-bred, four-wheel independent suspension featuring lightweight, high-performance aluminum control arms and knuckles, damped by lightweight coil-over shock absorbers. Power is delivered to the pavement via a Dana 44-4 Hydra-Lok speed-sensing limited-slip differential.


The 2006 Dodge Viper SRT10 Coupe rides on unique forged aluminum wheels -- 18" x 10" front and 19" x 13" in the rear. Each is clad with a Michelin zero pressure run-flat tire, and each tire includes a low-pressure sensor in the valve stem.

The all-new 2006 Dodge Viper SRT10 Coupe will be available in Dodge dealerships in the fall of 2005.

The Dodge Viper SRT10 is hand-built at the Conner Avenue Assembly Plant in Detroit.
 

·
Registered
Joined
·
3,579 Posts
Discussion Starter · #3 ·
thanks Toby.....I think the coupe will define the fate of the Gen II.
 

·
Registered
Joined
·
2,099 Posts
Toby said:
All-new 2006 Dodge Viper SRT10 Coupe “Tops Off” Viper Line, Continues Viper Tradition of Power and Performance

Los Angeles, Jan 05, 2005
500/500/500 cubic inches, horsepower and torque on tap – with a top


SRT Performance: 0-60 mph in less than 4 seconds, 60-0 mph braking in less than 100 feet, 0-100-0 mph in low 12-second range


Hardtop 2006 Dodge Viper SRT10 offers racing, autocross enthusiasts new alternative
The Dodge Viper legend began with the 1992 Dodge Viper RT/10 Roadster and grew with the introduction in 1996 of the Dodge Viper GTS Coupe.

History is repeating itself.

When the third-generation Dodge Viper made its debut in 2003, it did so in the form of a convertible. For 2006, the Dodge Viper SRT10 debuts in an all-new Coupe form – to the acclaim of “Viper Nation,” the community of die-hard Viper owners throughout the world.

“Demand for a Dodge Viper Coupe started the day we introduced the Dodge Viper SRT10 Convertible for 2003,” said Dan Knott, Director, Street and Racing Technology (SRT), Chrysler Group. “The all-new 2006 Dodge Viper SRT10 Coupe is a natural evolution of the heritage of the Dodge Viper, and gives enthusiasts exactly what they’re looking for in the ultimate American sports car.

“Dodge Viper SRT10 customers want to go beyond the level of the regular enthusiast, to the level of outrageous performance,” said Knott. “Our all-new 2006 Dodge Viper SRT10 Coupe gives our customers that performance in a stunning new package.”

Dodge Viper SRT10 is about uncompromising performance and stunning looks. With an 8.3-liter 500-horsepower V-10 engine contributing to blistering acceleration (0-60 mph in less than 4 seconds, 0-100-0 mph in the low 12-second range), and a bold appearance marked by Dodge’s signature crosshair grille design, deep-cut side scallops, swept-back fenders and lowered hood lines, the Dodge Viper SRT10 Convertible had no equal. Until now.

2006 Dodge Viper SRT10 Coupe Exterior
The exterior design of the all-new 2006 Dodge Viper SRT10 Coupe, with its “double-bubble” roof and dramatic, unique rear styling with wrap-around taillamps reminiscent of the Viper GTS Coupe, is what sets it apart from its Convertible sibling – and connects it to the Viper heritage.

“It was important for us to sustain the emotion in the design,” said Trevor Creed, Senior Vice President, Design, Chrysler Group. “We wanted the 2006 Dodge Viper SRT10 Coupe design to include a nod to the original Viper GTS Coupe, but in a contemporary way.

“The Dodge Viper SRT10 Coupe owner is often a racer, and the car has to scream that, even when it’s idling at the stoplight,” Creed added. “The bottom line is that the new Dodge Viper SRT10 Coupe’s design says a lot about its unique character, and the car’s performance is the payoff.”

In many cases, a convertible is derived from a coupe. After the coupe’s top is removed, structural reinforcements must be added to regain torsional stiffness lost with the deletion of the roof structure.

In the case of the 2006 Dodge Viper SRT10 Coupe, the starting point was the Dodge Viper SRT10 Convertible, which has a stout structure to begin with. With the addition of the roof structure, the Viper SRT10 Coupe becomes even more torsionally rigid than the Convertible.

From an aerodynamic standpoint, the all-new 2006 Dodge Viper SRT10 Coupe is designed for increased downforce and high-speed stability, with a sloping roofline and decklid spoiler.


The only bodywork that the Dodge Viper SRT10 Coupe shares with the Convertible is the front fascia and fenders, hood and doors. In addition to the new canopy and decklid, the 2006 Dodge Viper SRT10 Coupe has a special windshield surround, door side glass, rear fascia, quarter panels and taillights.

The decklid for the Dodge Viper SRT10 Coupe was designed for customer convenience as well as structural integrity. The decklid opening is deeply integrated into the rear fascia, which offers a low lift-over height for stowing cargo. Gas struts hold the decklid in place when open; when closed, the decklid is secured with a lock that meets federal regulations for latch safety.

The 2006 Dodge Viper SRT10 Coupe design also took some of its cues from Dodge Viper’s heritage. For example, the Center High-Mounted Stop Light (CHMSL) on the decklid, although all-new for 2006, looks similar to the “snake-head” design on the Viper GTS of 1996-2002.

The 2006 Dodge Viper SRT10 Coupe will be available initially in Viper Blue with twin Stone White racing stripes, harkening back to one of the most popular Vipers ever, the 1996 Dodge Viper GTS.

2006 Dodge Viper SRT10 Coupe Interior
The form-follows-function strategy continues inside the 2006 Dodge Viper SRT10 Coupe.

“For helmet clearance, we brought back the ‘double-bubble’ roofline from the original Dodge Viper GTS,” said Creed. “In fact, we began the process by utilizing a mannequin with a helmet to determine the height and shape of the roof.”

Another functional interior feature for the many owners who will take their 2006 Dodge Viper SRT10 Coupe racing is the roof and headliner structure that offers room to accommodate a safety cage, while maintaining as much headroom as possible.

Dodge Viper SRT10 Coupe-unique interior pieces also include various weatherstrip pieces, headliner, carpet and trim panels.

A result of the 2006 Dodge Viper SRT10 Coupe’s configuration is more usable trunk space – 4 cubic feet more than the Viper SRT10 Convertible, for a total of 6.25 cubic feet.

The 2006 Dodge Viper SRT10 Coupe also features a unique two-tone interior color scheme.

2006 Dodge Viper SRT10 Coupe Powertrain
The magic numbers for the Dodge Viper SRT10 are 500/500/500 – representing 500 horsepower, 525 pound-feet of torque and 505 cubic inches of displacement.

An aluminum-block 8.3-liter (505 cu. in.) V-10 engine powers the 2006 Viper SRT10 Coupe, generating 500 horsepower (372 kW) and 525 lb.-ft. (712 N•m) of torque. Ninety percent of the torque is available to the driver across a wide band -- the 1,500-5,600 rpm range.

Transferring the Dodge Viper SRT10’s power to the rear wheels is a heavy-duty six-speed manual transmission.

2006 Dodge Viper SRT10 Coupe Braking
Dodge Viper SRT10 Coupe braking power is defined by Brembo 44/40 dual opposing piston calipers in the front and Brembo 42/38 dual opposing calipers in the rear, gripping four 14-inch rotors. An anti-lock braking system (ABS) prevents lockup during hard braking.

This system results in a world-class braking performance of 60-0 mph in less than 100 feet, and completion of SRT’s signature 0-100-0 mph test in the low 12-second range.

2006 Dodge Viper SRT10 Coupe Ride and Handling
Handling and ride characteristics for the 2006 Dodge Viper SRT10 Coupe is derived from a race-bred, four-wheel independent suspension featuring lightweight, high-performance aluminum control arms and knuckles, damped by lightweight coil-over shock absorbers. Power is delivered to the pavement via a Dana 44-4 Hydra-Lok speed-sensing limited-slip differential.


The 2006 Dodge Viper SRT10 Coupe rides on unique forged aluminum wheels -- 18" x 10" front and 19" x 13" in the rear. Each is clad with a Michelin zero pressure run-flat tire, and each tire includes a low-pressure sensor in the valve stem.

The all-new 2006 Dodge Viper SRT10 Coupe will be available in Dodge dealerships in the fall of 2005.

The Dodge Viper SRT10 is hand-built at the Conner Avenue Assembly Plant in Detroit.
Word whore. :rofl:
 

·
Registered
Joined
·
3,471 Posts
Super Squirrel said:
thanks Toby.....I think the coupe will define the fate of the Gen II.
Define the fate??? What the fuck are you talking about.

Until the Gen3 coupe does this it will always be a insignificant POS poser car just like the SRT-10.









 

·
The Burn Clinic
Joined
·
12,779 Posts
Craig -

I think the Comp Coupe platform is the successor to that program rather than the new SRT Coupe. Currently, the Comp Coupe gets treated pretty badly in the FIA rules, so who knows if the past GT success will ever be replicated.

I think we both agree the Comp Coupe is more car than the GTS ever thought about being.
 

·
Registered
Joined
·
3,471 Posts
Smackie said:
Craig -

I think the Comp Coupe platform is the successor to that program rather than the new SRT Coupe. Currently, the Comp Coupe gets treated pretty badly in the FIA rules, so who knows if the past GT success will ever be replicated.

I think we both agree the Comp Coupe is more car than the GTS ever thought about being.
Completely agree, now lets see Dodge race it internationally. The C6R program is going strong and dodge needs to make them their bitch! They're already doing it in WC, time to take it global.
 

·
The Burn Clinic
Joined
·
12,779 Posts
I'd love to see that, too, but FIA, ALMS, and any other notable global GT series has stupid, overburdening rules in place for the Comp Coupe. I seriously think somebody at Dodge did a bukkake film with the FIA GT Director's sister.
 

·
Registered
Joined
·
7 Posts
So which one is actually closer to the production car:

GTSR to the GTS

or

Comp Coupe to the SRT-10

Clearly the body "style" of the GTSR was closer to the GTS. I said style as many dimensions were different. But the chassis and driveline of the Comp Coupe are almost exactly the same as the SRT-10. So which is more important the body shell or the under pinnings?
 

·
Registered
Joined
·
383 Posts
Gosh with all the shared stuff on the Comp Coupe, I would sure say it is closer than the GTSR to the GTS. Let's go on cost alone, at the time each is available:

GTSR - Oreca prepped .New price around $300,000
GTS - around 75,000

Comp Coupe - well equipped and set up for World Challenge Series. Should run around $150,000
SRT-10 - 85,295

Alot less gap in price and much closer in actual mechanical similarities. With SCCA changing the rules for 2005, the Comp Coupe had to go back to factory headers and a restrictor plate, so much nearer an SRT-10 than the FIA beast of the 90s!!! :thumb:
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top