Dodge SRT Viper Forums : ViperAlley banner
1 - 10 of 10 Posts

·
Registered
Joined
·
444 Posts
Discussion Starter · #4 ·
They are not my wheels, I just found them.

And in reality they are 18x12 and 18x13, the seller measured them outside to outside which is incorrect. Nobody makes a 14" and unless you are running the M&H 390 width tire you would never need anything that big.

The seller is pretty close to me, if any of you guys would like me to check them out personally feel free to ask.
 

·
Registered
Joined
·
444 Posts
Discussion Starter · #5 ·
Jack B said:
Chuck:

I believe John will sell a pair to you for $800, therefore, this may not be a super deal at 1,400

John B at parts rack sells CCW wheels for $1600/set? where have I been all this time.

The site lists them for $2400/set.
 

·
Registered
Joined
·
165 Posts
I just bought the set :)

I've got a set of stock 01 rims now if anyone is interested...

Do you guys think 335's would fit on the front 12" wide rims, without rubbing?
 

·
Registered
Joined
·
444 Posts
Discussion Starter · #9 ·
Damn dude, Yeah I thought guys were running 335's all around for the track wheels. Not sure how they do for a daily driver, might rub on tight corners but go for it. Ya got a killer set of wheels man. :thumb:
 

·
Registered
Joined
·
863 Posts
You cannot turn to full lock. They are Ok on the strip but a problem on the street, especially parking or manuvering. They are also hard to control on rough roads, they grab the irregularities.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top