Dodge SRT Viper Forums : ViperAlley banner
1 - 19 of 19 Posts

·
Registered
Joined
·
3,999 Posts
Discussion Starter · #1 ·
This is my first time using a tender. Can I hook it up using the positive terminal by the PDS under the hood (like jump starting the car) and groud it to the body or frame rather than having to connect it directly to the battery?
 

·
Registered
Joined
·
3,999 Posts
Discussion Starter · #3 ·
That sounds great!! Where do I get one of those?
 

·
Registered
Joined
·
1,318 Posts
Edward 96GTS said:
buy the cigarrette adaptor, then you don't need to even raise the hood.
Wire the tender over to the side vent and you dont have to open the hood OR open the door.

Connect it to the POS terminal and the GND stud at the bottom. Get some wire clips at Radio Shack and attach to the control module housing screws.

Run the wires inside the bottom of the housing and allow just enough length so you can reach in the side vent to plug in the connector.

When not in use, put the cap on the connector and fold the wire back into the housing. (Invisible to the outside unless you know what to look for)

http://www.batterystuff.com/battery/deltran/battery_tender-ppc.htm
 

·
Registered
Joined
·
3,999 Posts
Discussion Starter · #5 ·
Thanks Ray! :thumb:
 

·
Registered
Joined
·
3,999 Posts
Discussion Starter · #7 ·
Holly hell, this is from 2003. I thought someone stole my screan name.
 

·
Banned
Joined
·
10,164 Posts
i hate when this shit happens. gets me everytime. by the way, why would you order the tender when you can swing by any abd auto or pepboys and just grab one there. it isnt like they are really any cheaper online.
 

·
Registered
Joined
·
71 Posts
The battery tender should have come with a simple 2 prong adapter that yes you can connect to the hot red post under the hood. the adapter then goes down beside the computer and then out of the side air vent. It also has a cap to cover the plug to prevent shorting out. Then when not being used you tuck it back into the vent, and the hood never has to be raised to connect to the tender.
 

·
Banned
Joined
·
10,164 Posts
I-5 boy the question was can the tender be connected in that fashion. Not where it should or could be purchased. More dumbass bullshit out of your useless piehole!!!
1 stretched ass, I was disappointed to see you haven't shined your dash with your peanut sized cranium yet. Keep up the chatter, it's in one ear and out the other. :blah: :blah: :blah:
 

·
Banned
Joined
·
10,164 Posts
:D
At least what I say means something. As yours does not once again!!
the only smack I hear coming from you is from your boyfriend standing behind you bitchtits. Keep sending the neg rep douchebag. IT HAS NO POWER. Yesterday v10kingsnake rep points 184. Today 211 and climbing, that includes you dumb ass neg rep you keep trying to impose:D take your head out of your ass and see the light already. you are a worthless tool. Even the poor noob that brought this thread back to life asked me why you are such a dick. like I said, keep showing your true colors. You want to talk smack any further lets do it in a place permitted, AG. Otherwise stfu already. See you in AG if you find someones balls to borrow,:D :D
 

·
Registered
Joined
·
3,999 Posts
Discussion Starter · #16 ·
Note to create a boner kill to the smack fest here, but I'll have to add an FYI to this thread. For the past 3 years I have just used the cigarette adapter for the Tender. Works great.

Now back to your regularly scheduled ass chewing.
 

·
Registered
Joined
·
17 Posts
I use to use the clip under the hood way, but the area get so hot while driving I was concerned about melting the insulation from the wires and shorting out. I now use the cigarette adaptor mentioned earlier. It is a lot simpler with the only downside being you need to keep your window open about 1/4" to route the cable through, still not too big of a deal.
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top