[JH23JOB]

I've seen Stop Techs rotors go for about $350 a pair, but these Roto-Tech rotors are $350 for a full set of FOUR. These are drilled and slotted just like the Stop-Techs. Just wondering, 'cause I'm sure someday I'll be in the situation that I'll need to replace the rotors on my GTS.

 

[Anthony - 98 GTS]

I have seen them on eBay and that's about it. :arcade:

 

[Achilles99]

Have you found anything else out about these rotors? Are they just stock ones that have been drilled and slotted? Even so, that's a FANTASTIC price for all four. I'm just wondering how long they last...

 

[Smokin]

Are they two piece rotors? The Baer Eradispeeds are two piece rotors.

 

[JH23JOB]

I'm pretty sure these are single piece rotors.

Is there an advantage over one, or the other ??

 

[REDSLED]

The Stop Techs have been lowered in price. For those of us at the track we use the Stop Tech Aero Rotor. They used to be $219 a piece. They are now only $159. They are not cross-drilled but they are slotted. They are great for the track but there is not much poser points to be gained for street use. They are single piece rotors.-Jonathan
www.stoptech.com

 

[E-Slab]

our problem is we want to score poser points....

 

[Mister Bone]

No one uses Brembo rotors?

http://hp.brembo.com/ComponentList.asp?ECSShopperID=C3EDN9KJD58D9JLS0L7DL4N48WNH72A5&LngCode=ENG&sCurrency=USD&PrCatID=3&CatID=17&PageNumber=1

I have the cross drilled Brembo Monoblock's on my VR4 and they have not warped or cracked.

 

[Snake Bitten]

No one uses Brembo rotors?

Uhm...$339 each.....Scheuyah...


The StopTech Rotors are $149 each ($298/pair) from Archer Racing...Due to the 88/12 bias, you could run the Power-Slots on the rear for around $235/pair, since they look the same...all are cadmium plated so they won't rust.

Or, like Smoke said...Baer Eradispeeds are very cool looking, two piece, you can paint or powder coat the hats to match your snake, for around $800 for the set of four!

 

[Mister Bone]

No one uses Brembo rotors?

Uhm...$339 each.....Scheuyah...


The StopTech Rotors are $149 each ($298/pair) from Archer Racing...Due to the 88/12 bias, you could run the Power-Slots on the rear for around $235/pair, since they look the same...all are cadmium plated so they won't rust.

Or, like Smoke said...Baer Eradispeeds are very cool looking, two piece, you can paint or powder coat the hats to match your snake, for around $800 for the set of four!

That's off thier site. These are also the 2 piece rotors.

They can be had for less. I can call up a guy I know who is a Brembo distributor if you need prices.

Or did you get the Eradispeed rotors yet.

 

[Snake Bitten]

Or did you get the Eradispeed rotors yet.

Once again...a quality used part came to my attention, and I pounced on the deal! (Or in this case, a set of barely used Baer Eradispeeds!)

Pics as soon as the snow melts...


Post the Brembo prices for the other "posers" who are not as thrifty as me!!! Don't they come with Red hats???

 

[Mister Bone]

Looks like you stepped in it again. Got yourself a deal. :thumb:

E-mail to my friend has already been sent. Will get prices for rotors hopefully soon.

I don't know about the hat colors, I thought all 2 pc. came with black hats. I do know that the calipers come in red and black.

My 1 pc. (monoblock) rotors are gold from the anti rust stuff they use.

BTW, Gerald did you get my check yet?

 

[Snake Bitten]

BTW, Gerald did you get my check yet?

Yep...got it the other day! Thanks!

 

[Mister Bone]

Good.

:thumb: Thank you and the MNVCA.

 

[J DAWG]

BTW, Gerald did you get my check yet?

Yep...got it the other day! Thanks!

You really are a whore. /images/graemlins/bootyshake.gif And I thought everyone else was just kidding. /images/graemlins/laughing.gif