[slaughterj]

Here's a how-to, pictures included, on transporting two rear Vipers for mounting, when no trunk space is available.

Step 1 - Confirm you have no trunk space available, as you can otherwise wedge 1 rear tire in the trunk (after removing the spare), though that requires the trunk lid to rest on top of the tire edge:

[image]http://www.yandros.com/Viper/ViperTires/ViperTrunkFull.jpg[/image]

Step 2 - Properly load your tires for excessive highway speeds:

[image]http://www.yandros.com/Viper/ViperTires/ViperTiresLoadedLeft.jpg[/image]

[image]http://www.yandros.com/Viper/ViperTires/ViperTiresLoadedRight.jpg[/image]

Step 3 - Once you have confirmed your tire change appointment and are near the tire change facility, engage in tire smoothing exercises:

[image]http://www.yandros.com/Viper/ViperTires/ViperTiresTread.jpg[/image]

Step 4 - Remove your centercaps carefully, and tell the installers to fill tires to 29 psi and remount tires applying 90 lb-ft of torque.

 

[GTS Dean]

I put two 335s side-by-side in the trunk of my RT. Then, I used the nylon strap to hold the trunk lid snug against the tires. If you have a full Viper Quarterly collection, look for a pic somewhere in the first 3 or 4 issues.

 

[Chuck 98 RT10]

Tire pressure is a little low on the right.

[image]http://www.yandros.com/Viper/ViperTires/ViperTiresTread.jpg[/image]

 

[BigCarrot]

:clap:

 

[V10 MOJO]

LMFAO; you ******* /images/graemlins/supergrin.gif

see you in beechbend