Dodge SRT Viper Forums : ViperAlley banner
1 - 15 of 15 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter · #1 ·
Is there a stock mopar replacement hub that fits the viper with 5 lugs so a conventional light weight drag wheel can be used? I know I've seen a black Viper on the forum with this done. Didn't see anything in the search. Also is there a smaller dia rotor, brake caliper and bracket that bolts on to fit inside a 15" wheel?
 

·
Premium Member
Joined
·
10,841 Posts
Why? There some good lightweight wheel options for track use out there that will fit the Viper and its brakes. CCW, OZ, SSR and Forgelines are the ones that come to mind right now.
 

·
Registered
Joined
·
3,598 Posts
Austin sounds like he's looking for a Drag wheel like a Bogart or Weld 5 stars or drag lites. What about a CCW Drag Pack?
 

·
Premium Member
Joined
·
10,841 Posts
Austin sounds like he's looking for a Drag wheel like a Bogart or Weld 5 stars or drag lites. What about a CCW Drag Pack?

Ah, gotcha. There ya go. The CCW Drag Pack.
 

·
Registered
Joined
·
83 Posts
Discussion Starter · #6 ·
Answer from Treesnake on the VCA forum for anyone interested

If so, here ya' go...

Dodge part numbers:
4641517AD 5 lug hub bearing
4815594 5 lug conversion center bolt
6502294 5 lug conversion center bolt nut

Not sure what type of brakes you were going to use.
These billett calipers and rotors are made by STRANGE Racing.
I am going to be running 15x3.5 "skinnys"...

Good Luck







Good Luck
 

·
Landscaping Professional
Joined
·
14,148 Posts
This 5 lug hub was standard on the Plymouth Prowler.
 

·
Registered
Joined
·
34 Posts
Bump, has anyone done this here? Is there a DIY thread someplace?

What was the solution for brakes, wonder if its possible to use ZR1 Carbon Ceramic brakes.
I would imagine ceramic brakes from any car whether zr1, gt-r or porsche would be incredibly expensive.
 

·
Registered
Joined
·
23,349 Posts
same hub used on the durango IIRC
 

·
Registered
Joined
·
10 Posts
Answer from Treesnake on the VCA forum for anyone interested

If so, here ya' go...

Dodge part numbers:
4641517AD 5 lug hub bearing
4815594 5 lug conversion center bolt
6502294 5 lug conversion center bolt nut

Not sure what type of brakes you were going to use.
These billett calipers and rotors are made by STRANGE Racing.
I am going to be running 15x3.5 "skinnys"...

Good Luck







Good Luck
Are the 5 lug hub bearing part numbers the same for Viper front and rear??
 
1 - 15 of 15 Posts
Top