Dodge SRT Viper Forums : ViperAlley banner
1 - 6 of 6 Posts

· Registered
Joined
·
794 Posts
Discussion Starter · #1 ·
10.47 @ 132 in Vegas @2100ft on BFG\'s

I am currently in vegas and running an event here with a whole bunch of supras. Here is the time slip numbers.
LVMS 2100FT elevation
Temp 74
Relative humidity 70
Absolute barometer 29.32

60' 1.525
330' 4.354
1/8 6.720
MPH 106.66
1000 8.767
1/4 10.474
MPH 132.57

That track hooked hard! Another run I got a 1.547 60' time. I was able to launch at 3500rpm with no wheel spin.
 

· Registered
Joined
·
318 Posts
Re: 10.47 @ 132 in Vegas @2100ft on BFG\'s

Great job!! /images/graemlins/applause.gif Its great to see you progressing, have you put the fuel system in yet?
You need to come to the Texas shootout in Dec, I think you car will be a real contender in the SC field, espically at the SAN ANTONIO track. The altitude , the temp (hopefully) and traction is great here.
 

· Registered
Joined
·
794 Posts
Discussion Starter · #5 ·
Re: 10.47 @ 132 in Vegas @2100ft on BFG\'s

Snakebitten
I run 17psi on the BFG's.

nohres
I made 6 passes during the weekend and 5 of the 6 ranged from 1.52-1.54. The other run was late during midnight drags and there was rubber everywhere so I got a 1.8 60 foot time. I know the supra that ran an 9.2 did a 1.3x(low) 60 foot time.

RSI950
I did install a new aeromotive fuel system which should be good to 1000HP. The texas event is far away but it is not completely out of the question. Have you ran yours in the 1/4 yet?
 

· Registered
Joined
·
318 Posts
Re: 10.47 @ 132 in Vegas @2100ft on BFG\'s

I ran on Pilots, so the pass was not too spectacular. My best pass was an [email protected], 60' was 2.1xx. My 1/8 speed was only 99-101. Can't find the slips. The rest were in the 11.50's.
I got some BFG's, but have not gone back to the track. The sad part is that I ran 11.40's at 127 on motor alone. :squint:
Right now I am trying to get ready for the shootout. I got a new clutch, but still need skinnies and slicks, and probably a custom cam. I will keep you posted on the progress.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top