Throttle response Gen4
I tried a differiant approach to improving the throttle response of my 08 Viper.
I did the standard throttle calibration steps but added a 3/4" wood spacer behind the accelerator pedal.
It appears this change has made a significant improvement!
I'm looking for other Gen 4 owners to try this so I know it's not just my imagination.
Calibration steps below:
1. Insert key in ignition , turn key to the far right but don't start the car.
2. Depress accelerater quickly to the floor with the 3/4" spacer behind it. (hold it there)
3. Turn the ignition switch to off, then release the gas pedal, remove the spacer. (done)
Start and drive as normal.