Fuel line o-ring

[Lunchbox]

Searched but didn’t turn up anything difinitive. Anyone know what size o-ring is on the fuel feed line that connects to the intake manifold. Planned on replacing it regardless, but Misplaced the original I took off and need a suitable replacement.

[WDW MKR]

See below on intro provided by Dave. I have a whole pack of them if you want me to throw a couple in the mail.

OEM injectors. I get the o-rings from McMaster Carr.

-> dash 203 brown viton McMaster Carr p/n 5267T166
-> dash 117 brown viton McMaster Carr p/n 5267T83

For the fuel line connection I don't use the factory line but the o-ring should be the same.

-> dash 903 brown viton McMaster Carr p/n 5267T485


Sent from my iPad using Tapatalk

[Lunchbox]

Originally Posted by WDW MKR

See below on intro provided by Dave. I have a whole pack of them if you want me to throw a couple in the mail.

OEM injectors. I get the o-rings from McMaster Carr.

-> dash 203 brown viton McMaster Carr p/n 5267T166
-> dash 117 brown viton McMaster Carr p/n 5267T83

For the fuel line connection I don't use the factory line but the o-ring should be the same.

-> dash 903 brown viton McMaster Carr p/n 5267T485


Sent from my iPad using Tapatalk

Thanks a bunch! No worry on sending any, I have to place a McMaster Carr order anyway so ill just toss em in as well.