Viper Alley - Dodge Viper Forum -SRT Viper

Viper Alley - Dodge Viper Forum -SRT Viper (
-   Viper Discussions - Gen I & II (
-   -   need trans. crossmember specs. (

mrbob December 31st, 2015 06:19 AM

need trans. crossmember specs.
mrbob here , need the measurements of a gen 1 crossmember , legnth , width and distance between the mountig holes . my winter project in the cold midwest stainless steel beefed up version . thanks to all

dave6666 December 31st, 2015 06:28 AM

I'm assuming that since you don't have the original one to get these measurements off of, that it was destroyed doing ___________ ?

latamud December 31st, 2015 06:49 AM

I was looking for info on the Gen1 crossmember. Is it different from the Gen2?

mrbob December 31st, 2015 06:50 AM

the car is put away for now with no access to it .

dave6666 December 31st, 2015 07:02 AM


Originally Posted by mrbob (Post 3726010)
the car is put away for now with no access to it .

So the old one is still good? You're just trying to build a better one?

The reason I'm asking these seemingly annoying questions is that once I understand your intentions - which as you avoid answering my questions I still don't - that I can give you further advise like the OEM crossmember is actually strong enough in most cases. This as substantiated by chassis engineers that design cars.

So if you broke yours, which you avoided that question, it would be interesting to know why. Seeing as it's already, according to engineers that design cars, strong enough.

Good luck tho.

Chuck 98 RT10 December 31st, 2015 07:12 AM

I thought Viper Parts might have one but I guess they only have GenII? Might be worth contacting them.

99RT10&GTS December 31st, 2015 12:45 PM

I have a couple. Sell'em cheap. :D

LifeIsGood December 31st, 2015 01:23 PM

Sometimes, you just want to replace parts with nicer, prettier ones...just because you can...

mrbob December 31st, 2015 07:31 PM

my cross member is perfect , my car has 4,100 miles on it . i just wanted the specs. for a gen 1 . i just wanted to do a winter project .

All times are GMT -5. The time now is 12:26 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd. is in no way affiliated with Daimler Chrysler. Dodge, Viper, RT/10, the Viper logo and likeness are registered trademarks of Daimler Chrysler.
The contents of this site are owned by ViperAlley.Com and may not be used or reproduced without the express written permission of the Administrator.