I have been getting sporadic emails regarding my diffuser blade setup. It has been out of production for a bit but if there is enough interest I can always bring them back. I would need a minimum of 5 preorders to produce another batch. Here is all the information on the blades. Pricing will be slightly higher than before due to powder coating costs. This setup is designed to bring the gen 3 & 4 look to the gen 2 with minimal modification to the rear bumper. 1 hole is required per blade and it is an extremely small hole. Each kit include aluminum braces that you place inside the bumper to stiffen the blades up. Mounting hardware is not included due to the 50,000 different types you can use for the set from rivets to traditional trim screws.
Pricing
4 shipped no coating 100
4 shipped black powder coating 130
6 shipped no coating 140
6 shipped black powder coating 180
Seems there are a couple folks interested in me producing these again. I am back from deployment and I will be in VA during Thanksgiving so I can get a set made. Here are the prices
4 shipped no coating 100
4 shipped black powder coating 140
6 shipped no coating 140
6 shipped black powder coating 200
The ones on my personal vehicle have been on there 4+ years and they were sprayed with primer and rustoleum satin black automotive paint. Not a chip, scratch or anything. Before I can place the order I need 5 sets pre-ordered and paid for. I get 56 blades per batch so that determines the amount of sets I have by orders. Also there is no mounting hardware included due to people's various tastes on how they want to mount them (I used automotive trim screws, some used rivets). If your interested shoot me a pm or post in here.
I advertise them as looks only though I have experienced and a lot of my customers have experienced reduced dirt build up on the rear bumper. I have zero factual data to back that up with besides my experience and customers feedback.
Pre-Orders
1.Rebound (VA 4 non coat)
2.SARaptor (VOA 6 non coat)
3.PRVT JET (VA 4 non coat)
4.D Rail (VA 4 blk coat)
5.Venomiss (VOA 4 blk coat)
6.SilverSnake (VA 6 blk coat)
7.drewsss (VOA 4 blk coat)
8.sassasfras (VA 4 non coat)
9.gerch85 (VOA 6 non coat)
14 individual blades remaining. Once payment has been received the order will be placed. Estimated time for shipping will be Thanksgiving weekend. All emails with instructions have been mailed out. Still waiting on one to provide email address.
10 individual blades remaining. Once payment has been received the order will be placed. Estimated time for shipping will be Thanksgiving weekend. All emails with instructions have been mailed out. Still waiting on one to provide email address.
If for some reason more are accounted for than expected I can add you to a list and find out if I can do a half batch as well so don't let the blades remaining deter you.
4 individual blades remaining. Once payment has been received the order will be placed. Estimated time for shipping will be Thanksgiving weekend. All emails with instructions have been mailed out. Still waiting on one to provide email address.
If for some reason more are accounted for than expected I can add you to a list and find out if I can do a half batch as well so don't let the blades remaining deter you.
2 Videos of the diffuser blades diffusing! Just kidding, videos from today of me horsing around at SOCAL drift day, you just happen to get a good view of the blades.
If I get enough other folks who want sets I can possibly do a half batch at the same time. Here is the standby list. I don't have these orders placed often (last one was over 2 years ago) and each time I need a 5 person preorder.
1.RE SERPENT (VOA 4 blk coat)
Talked to the guy who does the cutting of the blades for me. It won't be an issue since the first batch is full. The cutoff date to order is November 4th, I have to have all orders in by that date.
I bought the blades from KNG SNKE and 4 years later they still look great! My car is the red silver gts in the photo album. It makes my nice red car look even better. Yellow cars need this "mod" because they lack in the looks department to begin with!
November 3rd is final date to get order in and payments sent. They will be cut shortly after that and sent to the powder coaters. I don't know when I will be doing another batch or even if I will be doing another one because of the required order quantity and interest needed.
Total:68 diffuser blades
Estimated time for shipping will be Thanksgiving weekend.
Currently 9 of 14 have paid.
And Martin you are a clown. LOL
Emails have been sent to everyone with payment info. If you did not receive an email I either have the wrong email address or don't have your address at all.
November 3rd is final date to get order in and payments sent. They will be cut shortly after that and sent to the powder coaters. I don't know when I will be doing another batch or even if I will be doing another one because of the required order quantity and interest needed.
November 3rd is final date to get order in and payments sent. They will be cut shortly after that and sent to the powder coaters. I don't know when I will be doing another batch or even if I will be doing another one because of the required order quantity and interest needed.
November 3rd is final date to get order in and payments sent. They will be cut shortly after that and sent to the powder coaters. I don't know when I will be doing another batch or even if I will be doing another one because of the required order quantity and interest needed.
There have been some questions regarding hardware. You use your stock bolts for one hole on each blade, for the second hole you will need to purchase your own hardware. I recommend autozone trim screws. The diffuser blade kits include the blades ordered and the metal bracing for the inside of the bumper.
November 3rd is final date to get order in and payments sent. They will be cut shortly after that and sent to the powder coaters. I don't know when I will be doing another batch or even if I will be doing another one because of the required order quantity and interest needed. Please include your email address in the PM so I can send you the information. This will most likely be my final run of these blades so if you want a set now is the time to order.
Pre-Orders
1.Rebound (VA 4 non coat)
2.SARaptor (VOA 6 non coat)
3.PRVT JET (VA 4 blk coat)
4.D Rail (VA 4 blk coat)
5.Venomiss (VOA 4 blk coat)
6.SilverSnake (VA 6 blk coat)
7.drewsss (VOA 4 blk coat)
8.sassasfras (VA 4 non coat)
9.gerch85 (VOA 6 non coat)
10.braunstein82 (VOA 4 blk coat)
11.slovenom (VOA 6 blk coat) (No email provided)
12.latamud (VA 4 non coat)
13.RE SERPENT (VOA 4 blk coat)
14.twinturboterror (VA 4 non coat)
15.matt dillon (VCA 4 non coat)
16.R M (FB 6 non coat)
17.M R (FB 4 blk coat)
18.J P (FB #??)
19.J S (FB 4 blk coat)
20.Coppervenom (VA 4 blk coat) (No email provided)
Total:86 diffuser blades
Estimated time for shipping will be Thanksgiving weekend.
Currently 14 of 20 have paid.
Pricing
4 shipped no coating 100
4 shipped black powder coating 140
6 shipped no coating 140
6 shipped black powder coating 200
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Dodge SRT Viper Forums : ViperAlley
2.1M posts
32.4K members
Since 2003
A forum community dedicated to Dodge SRT Viper owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!