Looking for new shift knob

[cr92max]

I wanted to see if anyone has an aftermarket knob laying around that I can buy. I currently have the round MGW knob with the Gen 3 logo and wanted a shorter version with a similar knob with the correct sneaky pete logo. Let me know if you have one laying around before I purchase a new one. Pics as well if you have.

[99RT10&GTS]

You should be able to screw the MGW all the way down to the bottom making it VERY short. That's what I did on mine. Do you have a B&M short shifter?

[getbit]

PM sent

[cr92max]

There is a good 2" of the shaft showing on my knob from the bottom of it to where the boot connects. I want to get rid of all of this exposed shaft. I wasnt aware that I could adjust aything on the knob itself? Its almost like someone added a lengthened shaft compared to the typical ones I see. I will tryt to get some pics when I get home.

[AM.MSCL]

I would be interest in the MGW one if you completely replace it.
Ray

[cr92max]

Originally Posted by AM.MSCL

I would be interest in the MGW one if you completely replace it.
Ray

Ray,

I think I am going to go with a first strike knob so I would be willing to sell you my current one. My plans were to put it up on here anyway. Send me a PM if you are intrerested. Heres what it looks like

[jasontiff]

I have a similar problem...it's the design of the Gripper knob. I have a Hurst but because that knob has such long threads my shifter is sitting at stock height, about 1" above where the Hurst knob was. I've driven it a little and don't like it. I plan on cutting the shaft or buying a B&M.

[cr92max]

I got a new one on the way. Hopefully it will work out. Thanks guys.