Re: Getting a 1994 rt/10
They can be used, but you'll need to either cut your existing rear fascia for muffler/exhaust tip clearance, or buy a used Gen2 fascia. The original RT exhaust system has quite a bit of back pressure, and either going to hi-flow cats, and/or lower restriction mufflers is a good way to improve performance and sound. I do NOT recommend going catless with free-flow mufflers. The resonance and volume is painful to the ears. On the intake side, you will improve breathing (assuming you have 100% stock components) by removing the intake tubes and resonance canister between them and going to K&Ns and smooth inlet tubes. Even with stock exhaust manifolds, all this will free up about 25+ hp and get you to around 390 rwhp if the motor is in good shape.