Originally Posted by EllowViper
So I'm right in the middle of doing my 2002 Dakota 4x4 front suspension...ball joints, Hubs, inner/outer tie rods, CV axles, brakes, rotors. So I did the inner ties rods yesterday and they are different than the Viper (as pointed out in another recent thread below). I think the outer are the same (dime a dozen) but the inner is different....male thread on the Dakota and female thread on the Viper.
93-96 2wd Dakota parts work with some cutting. Using inner/outer tie rods currently front/rear, but can't get the steering rack to seal.