Viper Alley - Dodge Viper Forum -SRT Viper - View Single Post - Trouble getting driveshaft and shift knob off
View Single Post

Old November 28th, 2015, 02:12 PM   #17
CottonMouth
Senior Member
 
CottonMouth's Avatar
 
CottonMouth is offline
Join Date: Jun 2010
Posts: 1,342
CottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 pointsCottonMouth is not afraid of bears with 8719 points
Rep Power: 69
Judging from the bend in the shifter, that appears to be a Hurst and not a stock unit, so there will only be the one jam nut under the shifter ball. If you are looking down at the shift knob, be sure are you are turning the jam nut clockwise and/or turning the shift knob counter clockwise.
  Reply With Quote