Viper Alley - Dodge Viper Forum -SRT Viper - View Single Post - Trouble getting driveshaft and shift knob off
View Single Post

Old November 28th, 2015, 01:01 PM   #14
Cap'n Hook
Senior Member
 
Cap'n Hook's Avatar
 
Cap'n Hook is online now
Join Date: Apr 2014
Location: Central Texas
Posts: 1,274
Cap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 pointsCap'n Hook is not afraid of bears with 5763 points
Rep Power: 45
Try taking the load off the rear end, if you have the suspension at full droop. You may be applying unknown pressure against the caps/straps if you have the car in the air. That little bit of pressure could be making the straps similar to how a friction lock washer works. I suck at explains stuff how my mind sees it, but if you raise the rear to close to normal ride height, it may relieve enough pressure against the straps/bolts to loosen them easily.
  Reply With Quote