Viper Alley - Dodge Viper Forum -SRT Viper - View Single Post - Trouble getting driveshaft and shift knob off
View Single Post

Old November 28th, 2015, 06:22 AM   #9
2001GTS
Senior Member
 
2001GTS is offline
Join Date: Dec 2012
Location: Land Between the Lakes, TN
Posts: 905
2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points2001GTS is not afraid of bears with 4101 points
Rep Power: 35
What Dave said, and of course hit both sides of the bolt with penetrating fuild.

Second, someone probably used loctite Red.

I used a short socket on mine, it took a 1/4" drive however.
Also try putting the socket on first then attaching the extension.
  Reply With Quote