Viper Alley - Dodge Viper Forum -SRT Viper - View Single Post - ATTN: Craig201 - ? about model customizing
View Single Post

Re: ATTN: Craig201 - ? about model customizing
Old February 16th, 2004, 05:38 AM   #2
NOITALL
Senior Member
 
NOITALL's Avatar
 
NOITALL is offline
Join Date: Jan 2003
Posts: 3,471
NOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 pointsNOITALL is not afraid of bears with 18096 points
Rep Power: 138
Re: ATTN: Craig201 - ? about model customizing

yep I completely sandblast them down to bare metal then use regular grey primer so the paint sticks. Depending on what you're using for an air supply I go with about 25-30 psi so I don't get any orange peel. Make sure you lay down enough base coat so the paint is consistant in color and thickness. Then hit it with 3-4 coats of clear coat so the finish is smooth and shiny.

Any other questions just give me a shout.
  Reply With Quote