Viper Alley - Dodge Viper Forum -SRT Viper - View Single Post - Idle air control motor and carbon = stall

CWhiteRun · January 3rd, 2014, 08:38 PM

Also, I've found it best not to push/pull on the IAC plunger when you pull the stepper assembly out of the housing. I've killed a few by doing this. Not sure what caused them to fail internally...Maybe manually moving the plunger somehow pushed it outside of its operating range....regardless, every one I've done this to has failed.

January 3rd, 2014, 08:38 PM	#7
CWhiteRun Senior Member CWhiteRun is offline Join Date: Jul 2008 Location: Dothan, AL Posts: 515 Rep Power: 28	Also, I've found it best not to push/pull on the IAC plunger when you pull the stepper assembly out of the housing. I've killed a few by doing this. Not sure what caused them to fail internally...Maybe manually moving the plunger somehow pushed it outside of its operating range....regardless, every one I've done this to has failed.