Viper Alley - Dodge Viper Forum -SRT Viper - View Single Post - Idle air control motor and carbon = stall
View Single Post

Old January 3rd, 2014, 07:07 PM   #6
dave6666
Senior Member
 
dave6666's Avatar
 
dave6666 is offline
Join Date: Dec 2006
Posts: 31,583
dave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 points
Rep Power: 257
Quote:
Originally Posted by Undrpsi View Post
Take it off and clean with carb cleaned. I know bad PVC valve motor will use a lot of oil. I would start with that.
Carb cleaner can damage seals. I would never use carb cleaner on an IAC or throttle body etc that has plastic or rubber parts.
  Reply With Quote