Viper Alley - Dodge Viper Forum -SRT Viper - View Single Post - Idle air control motor and carbon = stall
View Single Post

Old January 3rd, 2014, 07:00 PM   #5
dave6666
Senior Member
 
dave6666's Avatar
 
dave6666 is offline
Join Date: Dec 2006
Posts: 31,583
dave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 pointsdave6666 is not afraid of bears with 34347 points
Rep Power: 257
Um I would avoid a wire brush inside the IAC at all cost. Use a synthetic bristle brush and THROTTLE BODY cleaner like CRC. Spray and agitate with the bristle brush until clean. Then spray the inside with some WD40 and shake out the excess. When you reinstall it the car will want to die the first few drives right at the start as it relearns. It took mine a month to be right again but solved the idle hang issue I had.
  Reply With Quote