Convert Ram SRT10 Paxton Kit to Viper

[stopltracr]

Anyone know what parts and the cost to convert a Paxton Ram SRT10 kit to work on a Viper? I know I would need most if not all of the intake tubing. The SRT10 kit also has the aftercooler mounted on top of the engine while the Viper is mounted in front. Just curious. I assume that I will also need a new piggyback ECU unless the tune is the same for the Ram and Viper. I found a good deal on a SRT10 kit but if it'll cost too much for the conversion I'll pass.

[V10Durango]

If you go to paxton's site and download the manuals to both kits you can compare the part numbers between the two. There are ALOT of differences between them. Most the hardware mounting the system to the engine. Paxton may swap parts with you? Doubt it.

[The Former PFR]

I can almost guarantee you will spend more converting one than buying the proper kit in the first place.

[burnhamb]

This should about do it, the hood is over rated anyway. Yes I know this is a Roe.