hello, this is Gary from X-Metal Engineering.
these are our new Viper billet valve cover-they fit all generations of Viper engines. We start by CNC'ing these from a solid 75lb block of 6061 t6 aluminum. Internally they are cnc'ed as well, and contain cnc'd stainless steel baffels, and these are also designed to work with all Roller rocker assemblies. Instead of spending $500 for valve cover spacers, you can beautify your engine at the same time with these new valve covers. Not only do they have thick flanges for a leak proof seal, but the baffle system allows for better crankcase breathing for better ring seal. our baffling is designed to eliminate oil contamination into the intake manifold, and it will help either a NA or blown engine.
The valve covers are availble polished inside and out as pictured, or in the machined finish. They covers will include 2 breather filters, gaskets, aeroquip socketless hose fittings, and polished ARP 12-point stainless bolts. This is an all inclusive kit, that we have for an introductory price of $990. we have them ready to ship for immediate delivery.
Thanks, and let me know how I can help.
812-453-4862 or I can be reached at SuperBike Shop 812-477-1740
uhhhhhhhhh, is the $400 in yen, deutche marks???????
OK, OK, I'll throw in a few coupons to Re Lobster to anti up the bid!
Just think of all the free advertisement you will get whenever I pop my hood at the car shows out here
OK, OK, I'll throw in a few coupons to Re Lobster to anti up the bid!
Just think of all the free advertisement you will get whenever I pop my hood at the car shows out here
i do love the rolls they have there. hmmmmmmmmmmmmmmmm
i am putting together some info on our new billet throttle body and some better pictures. plus------
i am putting a money back gaurentee on our new throttle body--if you dont agree or find that it does not make more power i will give you your money back.!
Thanks for asking, i am working on a new design for the GEN 2's ---a totally different, revolutionary apeture design, to keep veloicty up on NA engines, but pose no restrictions at hi CFM consumption for blown engines. just like our other products, it will carry a no BS-money back gaurentee.=that is works and makes more power.
we will price those at 5oo a pair, and should have something in a few weeks on them. i have a Viper and an SRTram, so we test everything on my personal vehicles as well as local customers and we do the R&d, and actuall production all in house, with no middle man. that way we get what we are really after.
i worked on the GEN 3 throttle body for over 2 years. i had 2 other xyz variations of a single blade and discovered that they had poor idle qaulity and in some cases lost power. on a bone stock 2004 mamba that had zero mods, we pulled it 3 times on the dyno stock to establish a base line. while the car sat and heat soaked, we pulled the stock TB and swapped ours over. then we made 3 more pulls, and every time, ours made at least 13 more HP and 10ftlbs on a STONE STOCK engine. with free flowing exhasut and other power adders it goes from there. please let me know how i can help in any way. and i will post up here soon about our GEN line of Throttle bodies!
You have a website with what you have available and prices? If not what parts you have available for a 2005, and what prices.
i will apologize ahead of time for my website its being upgraded right now. my site is X-Metal Engineering
please let me know how i can help you in any way.
I will be ordering these billet valve covers today!
Anybody want my old Valve covers shown here in this pic. , they are stock with overlays. I also have a set of stock red covers for the same.
$200 shipped...
Linear Mode
