Diff Drain Plug?

[flash1034]

Is there a drain plug on the rear differential of an 06 Viper?

Thanks,

Flash

[flash1034]

Bueller...? Bueller...? Does anyone know?

Flash

[TOM B]

This is from the service manual so I have to say yes.

STANDARD PROCEDURE - DRAIN AND REFILL
Drive the vehicle until the differential lubricant is at the normal operating temperature.
Raise vehicle on hoist.
Remove differential drain plug.
Remove lubricant from the axle assembly completely.
Install drain plug and tighten to 20 N·m (15 ft lbs).
Remove fill plug and fill rear axle with 0.12 L (4 oz) of Mopar® Limited Slip Additive and 1.21 L (41 oz) Mopar® Synthetic Gear & Axle Lubricant or equivalent.
Install fill plug and tighten to 20 N·m (15 ft lbs).

[flash1034]

Originally Posted by TOM B

This is from the service manual so I have to say yes.

STANDARD PROCEDURE - DRAIN AND REFILL
Drive the vehicle until the differential lubricant is at the normal operating temperature.
Raise vehicle on hoist.
Remove differential drain plug.
Remove lubricant from the axle assembly completely.
Install drain plug and tighten to 20 N·m (15 ft lbs).
Remove fill plug and fill rear axle with 0.12 L (4 oz) of Mopar® Limited Slip Additive and 1.21 L (41 oz) Mopar® Synthetic Gear & Axle Lubricant or equivalent.
Install fill plug and tighten to 20 N·m (15 ft lbs).

Thank you, Sir.

Flash