Mopar Comp Coupe Cam Specs

[mopar_mudder]

I am looking at putting the Mopar #P4510171 cam in my truck, sorry don't have a real Viper YET!!! Any way I have been looking on the truck forums but no one has really played around with this cam much in the truck and I thought the Viper owners would have more info.

Anyone one have the exact specs for the stock and Mopar cams to compare? Near as I can tell they both have the same lift at .544

The stock cam has 212/232 duration @ .05 and the Mopar cam is 210/230.5 @ .050 I don't have a LSA to compare.

Are thses number correct? I was expecting a bigger difference in the cam, not sure it is worth it. Any before and after dyno sheets?

Thanks for the help

[tucker]

I ran that cam in my Silver SRT, and there is a noticeable lope difference between stock. Power is minimal if you are just dropping it in without doing headwork, but the sound is nice.

[Final GTS]

Comp Coupe Cam Specs;

Lift Int/Ex
.320/.320

Duration Int/Ex
220/230.5

Intake Centerline: 117 Degrees

LSA
114 Degrees (assuming the cam calc is correct)

Stock Cam Specs;

Lift Int/Ex
.320/.320

Duration Int/Ex
220/230.5

Intake Centerline: ??? Degrees (Never Bothered...)

LSA
120.5 Degrees (assuming the cam calc is correct)

[mopar_mudder]

Originally Posted by Final GTS

Comp Coupe Cam Specs;

Lift Int/Ex
.320/.320

Duration Int/Ex
220/230.5

Intake Centerline: 117 Degrees

LSA
114 Degrees (assuming the cam calc is correct)

Stock Cam Specs;

Lift Int/Ex
.320/.320

Duration Int/Ex
220/230.5

Intake Centerline: ??? Degrees (Never Bothered...)

LSA
120.5 Degrees (assuming the cam calc is correct)

For just a difference in LSA it doesn't hardly seem worth it. I do have the Headers, ECM, that are made to work with it.

Anything in an aftermarket cam that will work with the stock rokers and lifters that gives you a nice gain in power?

[BIGBADCJ]

This cam only gives you about 8 horses correct?