Custom CAM Shafts

jpas · March 21st, 2006, 05:23 PM

Does anyone know who makes custom camshaft grinds for the SRT10, other then Comp Cams. I tried CAM Motion and they don't do any Viper Cams. At the SEMA show there was a display that had a Viper head with a kit installed that included; double springs, Ti retainers, shaft mount rockers and a valve cover spacer, does anyone recall who makes this setup.

nopokerface · March 21st, 2006, 05:29 PM

try crower

www.crower.com

MacedoMS · March 21st, 2006, 05:36 PM

Comp has pretty much perfected the cam gear pin location, which is crucial regarding valve timing, whereas other manufacturers have not.

viperkraz · March 21st, 2006, 07:09 PM

Get all of the info you can before you get one ground. I'm sure that any Viper tuner will be glad to help you out.

SylvanSRT · March 24th, 2006, 10:23 AM

call Arrow Racing motors and talk with Todd they build DCX racing motors and do all the factory/warranty rebuilds i'm sure he can help 248-852-5151 along with any other motor mods or parts. good luck

jpas · March 24th, 2006, 04:06 PM

Thanks for your help, I will try Arrow or have Comp make me a custom grind.

Earl H · March 27th, 2006, 09:49 PM

Jason...you finally got your SRT....congrats..gotta bring it by..plus I owe you some $. If you get by this weekend, I might have the Z back...completely redid everything (trick engine setup, turbo setup, A4 conversion).

viperkraz · March 29th, 2006, 06:43 PM

Bullet Cams has a cam ready to go. It is a 225/225 @.050 with .574lift(1.7rockers) and a 114LC. PM me for the contact info. Thanks