Help me find the squeek...

[turbosam6]

I have this annoying squeek, and to be honest I'm not sure how long its been going on. It may have started after the installation of some poly motor mounts. The weird thing is it goes away after about 5-10 minutes of driving. It is really hard to narrow down, but usually does it on cold starts and seems like its coming from the passenger side door/dash area, but thats a guess. Anyone have a similar experience?

[Viper Explorer]

Sometimes poly materials (mounts, bushings etc) will squeek, especially bushings when its cold out, mounts may be squeeking and stop when warmed up. Not sure if that helps. I had something similar happen to one of the trucks, kept hearing this squeek like sound and for months could not track it down, irked the hell out of me. Finally by chance I tracked it to the driver door (even though didn't sound like it was comming from there) and the glass was just slightly loose for some reason causing the sound....wedged a thin sticky felt section in there and solved it.

Those little sounds will drive you bonkers.

[viper spray]

Wd-40

[turbosam6]

Originally Posted by viper spray

Wd-40

"Everything can be fixed with either WD-40 or Duct tape. If it moves and its not supposed to, use duct tape. If its supposed to move and doesn't, use WD-40."

Now if only I knew where to spray it.....