as far as i know you can, i did it on my ta. im sure a sponsor on here sells them w/ pre bent lines. its also pretty easy to do ( on my car) hopefully it shouldnt be to hard to install on a viper either
I have a B&M line lock but dont know where to run it?
Should it go in the line from the master cylinder to the ABS pump?
Or should I run two, one in each line from the pump to the callipers?
Any help please?
Thankyou
Carl
Carl I really wish I could help you out here but my GTS is a 96 without ABS. My fear is that others might be shunning this thread because the guy who is installing what is the equivalent of a home heart bypass kit, is asking how to remove the top from an aspirin bottle. Maybe that's it, they think you aren't serious.
This is true but make sure you have a professional install it. The cut brake lines need to be DOUBLE inverted flared to hold securely.
When you use the line lock on ABS - pump the brakes hard!
Best of Luck!
Doug
You don't have to cut the brake lines to install one. I only share the details of this procedure with non-VCA members and those who don't refer to me as a prick. The pumping was good info.
Linear Mode
