All going on this weekend. I am looking for any tips/advice on this install. I am installing a set of Hennessey Headers to a B&B Catback. Also, I will be installing the Woodhouse Motormounts and tranny mount.
I am interested to know of any clearance issues, but I am also open to any and all tips, pointers or advice.
My S/C with the Woodhouse mounts is higher and is just hitting my hood pad, so get the mounts as down as possible in the cradle :-) You can do it easier on a lift with a prybar. if you use the Woodhouse trans mount, do NOT use the spacer as it will be 8372 feet too high :-) Oh yes, loosen the exhaust up if no flexpipe or be careful how much you lift the motor up or you will get an exhaust leak. Good luck! Gary
Linear Mode
