Need Torque Specs.

[94mkiv]

I left my service manual at home and I'm at my friend's place now. Anyone knows what's the torque specs for flywheel and pressure plate for a 96 GTS?

Thanks in advance,
Jason

[ViperSpecialist]

Clutch Bleed Screw 18 N·m (156 in. lbs.)
Clutch Cover Bolts 30 N·m (270 in. lbs.)
Flywheel Bolts 68 N·m (50 ft. lbs.)
To avoid distortion of the clutch cover (pressure plate), tighten bolts a few turns at a time. Use a crisscross pattern until bolts are all seated. Then tighten bolts to 30 N·m (270 in. lbs.) Remove clutch disc alignment tool.

[Jack B]

Another little tip - the plastic alignment tool only gets you close. The tool has too much slop. Once you get it positioned, double check that it is centered, or you will be pulling the trans out to align the spline.