Here is the fix for the rear window seal:
http://vca2.viperclub.org/forums/sho...rue#Post612735
This write up came from one of the mOrgue members:
You have a real hard time telling it's not factory on the glass when installed. Has a very slight gap-1/6" at the lower corners, The real sharp bend. On the inside rubber you have to cut small V's to make it wrap tight around the corners but they aren't noticeable. Think they used the good fast dry urethane glue and taped it on till it dried good. The rubber is the narrow one they use to glue windshields into cars. There is a narrow and wide. Can send you some if you need but any good auto shop should have it. I got some at speedy auto glass same stuff. Only difference from factory is the lip that wraps up on the outside of the glass isn't as wide.
__________________
97 RT/10 Looking into TWIN TURBO!!!!!!!!!!!!
99 RT/10 TNT headers, no cats, TNT exhaust, custom airbox. 795 RWHP/970 RWTQ Macedo Motorsports Tuning!Official "King of the V-10 Nats"!
65 Buick Wildcat Pro-street in the building phase
|