NORM....It is off to Lingenfelter for you !!!!!!

**Cudaman** · February 5th, 2005, 10:39 PM

Norm I normally do not post my dyno numbers...... BUT since our race season has been slow in starting.

With my recent mods and tweaking......we have peg Larry Macedo's dyno out. So I did some research and found a larger Dyno that I thought I would not peg out..

WELL I WAS WRONG.....

Much to mine disbelief I have pegged this 1800 wrhp dyno to the max.

They had a dyno day at this shop and they had some race cars trailered in and I put down more power than them. There was about 30 people there that were blown away by the power of my RT/10. I broke all the old records of the dyno. We had some tire traction problems of keeping traction on the dyno.

Norm, you know I work off a commission at Lingenfelter.....I get a kick back every time your car goes in....

ENJOY THE PAIN NORM......

Your Friend

The Cudamonster

STI · February 5th, 2005, 10:50 PM

That is fucking insane, I wonder what it puts down when the dyno can handle it??

1TONY1 · February 5th, 2005, 11:16 PM

So your saying your car makes 1800 rwtq or more ... and only 9XX rwhp ?

NOITALL · February 6th, 2005, 12:02 AM

ruh roh

JID · February 6th, 2005, 12:40 AM

that can't be real. no way. ut uh... no way.

*disbelief*

ROLLMODEL · February 6th, 2005, 12:51 AM

He's blowin smoke. There's no way.

plumcrazy · February 6th, 2005, 04:22 AM

dayum

acrdakota · February 6th, 2005, 06:38 AM

2x as much tq as hp, what did you convert it to diesel when we weren't looking. That can't be right. Please explain.

**Cudaman** · February 6th, 2005, 07:06 AM

Here is a copy of my bill from the dyno day

Cole Trickle · February 6th, 2005, 09:12 AM

direct port nitrous under the roe?

No Man · February 6th, 2005, 09:46 AM

Direct port bull shit injection.

1TONY1 · February 6th, 2005, 09:55 AM

Ward.....Iv'e got some prime real estate just west of St. Pete beach I will sell you at a bargin if your interested. I'll even give you a receipt to.

BigCarrot · February 6th, 2005, 10:18 AM

Fill us in here, Ward!

**Cudaman** · February 6th, 2005, 02:53 PM

It is real and is not photo shopped ....what you see are back to back pulls approx 27 minutes apart.

Cudaman

**John Hennessey** · February 6th, 2005, 03:46 PM

Dyno errors dont occur a lot but they can happen. Ward if you look at your previous best rw tq number and no matter what mod you added its not going to get you an 800 rw tq gain. If you want to truly know what your car accurately dynos with your current mods then go dyno at another shop. All dyno queen numbers aside - let us know if you picked up a second and 10 mph at the track. That is the true measure of whats going on with the motor.

BigCarrot · February 6th, 2005, 04:08 PM

That horsepower curve is about as smooth as room full of holes.

**TX WHOS YOUR DADDY** · February 6th, 2005, 04:15 PM

WARDO,FIST OFF CONGRATS ON TRUE DISCLOSURE.I SEE YOUR 400 SHOT OF DOPE IS WORKING GIRLFRIEND.THIS IS GREAT TO LET EVERYONE YOUR TRUE HORSEPOWER NUMBERS CAUSE WHEN THE MIGHTY LPE MOTOR WITH WAY LESS HORSEPOWER PUTS U ON THE TRAILER THE WHOLE VIPER COMMUNITY WILL BEAR WITNESS TO IT THE FACT THAT A BETTER BUILT AND DRIVEN VIPER CAN TAKE OUT A VIPER WITH MORE HORSEPOWER AND TORQUE.WARDO GO AHEAD AND DREAM YOUR DREAM FOR A LITTLE WHILE LONGER.SCOTT AND I WILL WAKE U FROM YOUR ILLUSIONS THE NEXT TIME OUR PATHS CROSS AT THE TRACK.AGAIN CONGRATS ON YOUR MACEDO DYNO QUEEN SHES GOT A GREAT SET OF SILICONE TITS BUT THAT ALL SHES GOT!

John Myrick · February 6th, 2005, 06:41 PM

You guys fell for it.

The math is simple...

HP=Torque*RPM/5250

all the time, every time, no correction factor, etc...

1800 ft-lb of torque will be 1300-1700 HP in the 4000-5000 rpm range.

ROLLMODEL · February 6th, 2005, 07:55 PM

Quote:

Originally Posted by John Myrick

You guys fell for it.

What exactly did we fall for again???? I dont think anyone actually believed this. And when you look at the graph, it just does not compute.

**TX WHOS YOUR DADDY** · February 6th, 2005, 10:23 PM

Quote:

Originally Posted by John Myrick

You guys fell for it.

The math is simple...

HP=Torque*RPM/5250

all the time, every time, no correction factor, etc...

1800 ft-lb of torque will be 1300-1700 HP in the 4000-5000 rpm range.

JOHN BUDDY...............THE ONLY PERSON THAT WILL FALL FOR ANYTHING WILL BE WARDO..............WHEN HE FALLS OUT OF BED AND WAKES UP REALIZING HE HAS BEEN DREAMING AGAIN.