Interior Upgrade

[Anthony - 98 GTS]

I am about to change out / upgrade the interior on my 1999 GTS.

My current interior is the brown/cognac and I am going with black with red stitching.

I am looking for a couple of parts:

E-brake handle in black. My interior guy says this is baked/pressed on and I should look for a stock replacement.

Passenger/drivers doors in black. I plan to recover the doors in leather alcantara, but I have not seen any center door sections that have been recovered that I like. Especially the recessed door handle.

Any suggestions where to get these parts?

Thanks.

[Disturbed 01]

You should add in CF center console and knee bolsters.

Redline has the shift boot and ebrake boots you need.

[Anthony - 98 GTS]

Originally Posted by Disturbed 01

You should add in CF center console and knee bolsters.

Redline has the shift boot and ebrake boots you need.

Going for an upgraded stock look.

Not looking for the boot(s), I will get those made.....I am looking for the e-brake handle, so I have to replace the entire assembly as they are not sold separately.

[twinturboterror]

I did a custom snake skin dash on mine! You know, cuz a viper is a snake!

[Curz]

Skelator dash FTW

[beer_man]

I've heard the glue bond on the ebrake handle can be loosened with a hair dryer thus allowing removal without destroying it.

[beer_man]

Originally Posted by Disturbed 01

You should add in CF center console and knee bolsters.

Are they available?

[Anthony - 98 GTS]

Originally Posted by beer_man

I've heard the glue bond on the ebrake handle can be loosened with a hair dryer thus allowing removal without destroying it.

....But I want to change it from brown to black. Don't want dye it if I can find a stock replacement....

[beer_man]

Originally Posted by Anthony - 98 GTS

....But I want to change it from brown to black. Don't want dye it if I can find a stock replacement....

Gotcha. But once off it can be recovered in a leather to match the rest, with a stitching to match the rest. Just an option.

[Anthony - 98 GTS]

Originally Posted by beer_man

Gotcha. But once off it can be recovered in a leather to match the rest, with a stitching to match the rest. Just an option.

The problem is around the button hole. It is bonded/press fit and he thinks it will lift after time....

[beer_man]

What are you going to do on the steering wheel? Or is it OK?

[bigmack339]

Originally Posted by twinturboterror

I did a custom snake skin dash on mine! You know, cuz a viper is a snake!

prior VCA, sir?

[Anthony - 98 GTS]

Originally Posted by beer_man

What are you going to do on the steering wheel? Or is it OK?

Going to pull the steering wheel and go back with red stitching. Still deciding on leather or alcantara....

[dave6666]

I have an FE wheel. Comes with red stitching already on it

[Anthony - 98 GTS]

Originally Posted by dave6666

I have an FE wheel. Comes with red stitching already on it

Send me a pic and price. Not sure if it will be worth it as it will only cost me $295 including removal and re-installation.....

[Moodie]

Originally Posted by Curz

Skelator dash FTW

Hell ya this times a billion! And some thunder cats for your exhaust

[Anthony - 98 GTS]

Does anyone know if a 92-96 door handle pull cup can be made to fit a 99?

In recovering the center section of the doors I don't want a stitched and screwed section for inside the door pull.....

[jasontiff]

Originally Posted by Anthony - 98 GTS

Does anyone know if a 92-96 door handle pull cup can be made to fit a 99?

In recovering the center section of the doors I don't want a stitched and screwed section for inside the door pull.....

Good call. My 2001 had recovered door panels and that section was by far the ugliest.

[Anthony - 98 GTS]

Originally Posted by jasontiff

Good call. My 2001 had recovered door panels and that section was by far the ugliest.

Yea, I have not seen a center door section I like. I can get the door pull cups for $37 each from Viper Parts of America......just wondering if anyone has done this.....

[GTS-R 001]

I have an Ebrake handle for a 2000 GTS