Modifications Over Stock Viper:
Engine displacement increased to 510 cubic inches (4.03 in. x 4.00 in.)
Forged Aluminum Pistons
Steel Wrist Pins
Forged Steel Rods
Off-set Machined Stock Crankshaft
Coated Rod Bearings
Balanced Rotating Assembly
Twin Garrett Ball Bearing Turbos
Modifications Over Stock Viper:
Engine displacement increased to 510 cubic inches (4.03 in. x 4.00 in.)
Forged Aluminum Pistons
Steel Wrist Pins
Forged Steel Rods
Off-set Machined Stock Crankshaft
Coated Rod Bearings
Balanced Rotating Assembly
Twin Garrett Ball Bearing Turbos
Front Mounted Inter cooler
Polished Stainless Steel Inlet Tubes
Silicone Inter cooler Hoses with T-Clamps
Stainless Steel Turbo Headers
Stainless Steel Turbo Down Pipes
External Waste gates
3 in. Stainless Steel Exhaust System
Ported/Polished Cylinder Heads with Stainless Steel Valves
Upgraded Valve Springs
Titanium Retainers
3-Angle Valve Job
T&D 1.7 Ratio Shaft Rocker arms
Hardened Push rods
Upgraded Hydraulic Lifters
Upgraded Fuel Injectors
Upgraded Fuel Rails
Upgraded Fuel Pump & Fuel Lines
Upgraded Fuel Pressure Regulator
Centerforce Clutch Upgrade
Mobil One 15/50 Synthetic Oil & Mobile One Filter
All Necessary Gaskets & Fluids
Air/Fuel Calibration
Venom 1000 Twin Turbo Exterior Emblems
Hennessey Emblem on Rear Bumper
Serial Numbered, Limited Edition Dash Plaque
Professional Installation
Dimensions:
Curb Weight: 3250 lbs
Height: 43.95 inches
Width: 75.7 inches
Wheelbase: 96.2 inches
Front/Rear Track: F: 59.6 inches
R: 60.6 inches
Engine:
Type: Twin-Turbo V10
Displacement: 8424 cc
Bore: 4.03 inches
Stroke: 4.00 inches
Valve train: OHV, 2 Valves/Cylinder
Horsepower: 1092 bhp @ ---- rpm
Torque: 1150 lb-ft @ ---- rpm
Rev Limit: 6000 rpm
Performance:
0-60 mph: 2.3 sec
0-100 mph: est 5.3 sec
1/4 mile: 9.52 sec @ 156 mph
Top Speed: est 250 mph
Lateral Acceleration: 1.06g
Braking 60-0: 110 ft
Slalom Speed: 75.1 mph
Gas Mileage City/Highway: -/-
Sent from my iPhone using AutoGuide.com Free App