I have been emailed by a couple folks asking if I still make these diffuser blades. This post is to see if there is interest in me producing another batch of them. I get about 12 sets of diffuser blades per batch and would need a minimum of 5 orders before I will produce a batch. Below is what the pricing would be as well as photos to cars that have the blades installed. If your interested please let me know and those who have contacted me already please contact me again because I don't have your PM's anymore.
Pricing
4 shipped no coating 100
4 shipped black powder coating 120
6 shipped no coating 140
6 shipped black powder coating 170
Currently I have 1 of 5 preorders filled. Once 5 preorders are placed I will put them back into production as I have before. Keep in mind it takes roughly 3 weeks once I place the order.
hey KNG, do you also make the front splitter...or do you know where I can get one for a relatively inexpensive cost- that still looks good but is affordable ?
After careful thought..KNG im not sure if they are going to look as good as they do on the GTS (which look way better)...my viper is a rt/10 and it just doesnt seem to look right looking at the pictures...what are your thoughts? I'm a 50/50 right now...
After careful thought..KNG im not sure if they are going to look as good as they do on the GTS (which look way better)...my viper is a rt/10 and it just doesnt seem to look right looking at the pictures...what are your thoughts? I'm a 50/50 right now...
It is completely up to you. I have multiple photos of them on an RT/10 and the owners of these vehicles are very happy. Pictures do not do them justice.
Pricing
4 shipped no coating 100
4 shipped black powder coating 120
6 shipped no coating 140
6 shipped black powder coating 170
Currently I have 2 of 5 preorders filled. Once 5 preorders are placed I will put them back into production as I have before. Keep in mind it takes roughly 3 weeks once I place the order.
Pricing
4 shipped no coating 100
4 shipped black powder coating 120
6 shipped no coating 140
6 shipped black powder coating 170
Currently I have 3 of 5 preorders filled. Once 5 preorders are placed I will put them back into production as I have before. Keep in mind it takes roughly 3 weeks once I place the order.
Are these also made in carbon fiber? One of the pictures shows a carbon fiber finish.
Currently no carbon fiber option is available due to cost. I have had 2 companies approach me in regards to making them in carbon fiber however the cost per blade to produce is over 200 dollars and that does not include any markup.
The photos you see with the carbon fiber are from a customer of mine who had them professionally wrapped. I think they look awesome wrapped personally and if I had any carbon fiber or a CF theme to my car I would have mine in that fashion as well. I do sell blades that are not powder coated and they are perfect for the wrap.
those look terrible, why modify one of the best angles/perspectives of this timeless design?
The design was made for my car and made to replicate the blades on an SRT Viper. Through OVERWHELMING demand they were put into production. Though they are not for everyone my sales don't lie and I have not had a single customer say they disliked them after installation. The photos posted focus on the blades. If you look at the photos that don't focus on the blades they blend quite well with the vehicle. Either way we all have opinions .
Pricing
4 shipped no coating 100
4 shipped black powder coating 120
6 shipped no coating 140
6 shipped black powder coating 170
The blades without coating are only available for order until the batch is produced. Once produced the remaining blades will head off to powder coating.
Currently I have 2 of 5 preorders filled. Once 5 preorders are placed I will put them back into production as I have before. Keep in mind it takes roughly 3 weeks once I place the order.
Pricing
4 shipped no coating 100
4 shipped black powder coating 120
6 shipped no coating 140
6 shipped black powder coating 170
The blades without coating are only available for order until the batch is produced. Once produced the remaining blades will head off to powder coating.
Currently I have 2 of 5 preorders filled. Once 5 preorders are placed I will put them back into production as I have before. Keep in mind it takes roughly 3 weeks once I place the order.
I finally installed mine that I bought months ago. Easy to do, measure twice, or maybe more, and drill once. Happy with the install, happy with the product. Looks subtle
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
.
Linear Mode
