Viper Alley - Dodge Viper Forum - View Single Post

**SoCal Rebell** · March 16th, 2008, 12:05 PM

OK, a little help please, I need an answer or a site I can go to that would know. I have a 1984 MB 500SL, it is the 1st 500SL. It is at my dad's in Vegas and is barely driven. Brought it in for a brake job 2 years ago and put 250 miles on it since. The front right brake is binding, while driving the car pulls to one side and the same on braking.

When jacked up I can barely turn the wheel, I take the wheel off and cannot turn the rotor. I open the bleeder screw and it turns, I bleed it, close the screw drive the car and the same problem. OK I figure bad caliper so I put a new on on. Same problem, any suggesstions?

March 16th, 2008, 12:05 PM	#1
SoCal Rebell Road Racer SoCal Rebell is offline Join Date: Oct 2003 Location: Mission Hills Posts: 18,828 Rep Power: 32	Mercedes Benz brake question.....help OK, a little help please, I need an answer or a site I can go to that would know. I have a 1984 MB 500SL, it is the 1st 500SL. It is at my dad's in Vegas and is barely driven. Brought it in for a brake job 2 years ago and put 250 miles on it since. The front right brake is binding, while driving the car pulls to one side and the same on braking. When jacked up I can barely turn the wheel, I take the wheel off and cannot turn the rotor. I open the bleeder screw and it turns, I bleed it, close the screw drive the car and the same problem. OK I figure bad caliper so I put a new on on. Same problem, any suggesstions? __________________ Coin-er of "Soup" Betamax will make a comeback! *The N.Y. Giants will repeat*