Viper Alley - Dodge Viper Forum - View Single Post

Big Jimbo · November 27th, 2005, 08:56 PM

I have a 2004 Gen 3 motor, trans, wiring harness and computer from a totaled SRT 10 truck. I was going to install it in a non-viper car and was wondering if anyone could give me some tips. I was going to remove all of the non engine related wiring from the harness and just leave the wiring necessary for the PCM sensors. Will I be able to get it running?
Thanks for any advice you may have.

November 27th, 2005, 08:56 PM	#1
Big Jimbo n00b Big Jimbo is offline Join Date: Nov 2005 Posts: 2 Rep Power: 0	Install a Gen 3 in a Hot Rod? I have a 2004 Gen 3 motor, trans, wiring harness and computer from a totaled SRT 10 truck. I was going to install it in a non-viper car and was wondering if anyone could give me some tips. I was going to remove all of the non engine related wiring from the harness and just leave the wiring necessary for the PCM sensors. Will I be able to get it running? Thanks for any advice you may have.