Viper Alley - Dodge Viper Forum - View Single Post - Stock Bottom End Gen2: 860 RW HP & 940 RW TORQUE (SAE)

**John Hennessey** · January 27th, 2004, 01:47 PM

Tom Wilkin's 1999 Viper GTS - Venom 800 Twin Turbo. Tom's car has a stock Gen 2 motor with stock cam plus Stage 2 Venom TT heads (9.0 cr) and T&D rockerarms. Boost was set at 13 psi. This car was driven 15 miles prior to the dyno test and then cooled for 45 minutes prior to making the pulls. There was no cooling of the intercooler prior to the tests.

First pull with tire spin on the Dynojet made 860 rw hp & 940 rw torque. The actual numbers were 889 rw hp & 973 rw torque.

Second pull made 841 rw hp & 920 rw torque.

Congrats Tom and have fun with the Viper guys up in Dallas.

January 27th, 2004, 01:47 PM	#1
John Hennessey Supporting Vendor John Hennessey is offline Join Date: Jan 2003 Posts: 3,735 Rep Power: 10	Stock Bottom End Gen2: 860 RW HP & 940 RW TORQUE (SAE) Tom Wilkin's 1999 Viper GTS - Venom 800 Twin Turbo. Tom's car has a stock Gen 2 motor with stock cam plus Stage 2 Venom TT heads (9.0 cr) and T&D rockerarms. Boost was set at 13 psi. This car was driven 15 miles prior to the dyno test and then cooled for 45 minutes prior to making the pulls. There was no cooling of the intercooler prior to the tests. First pull with tire spin on the Dynojet made 860 rw hp & 940 rw torque. The actual numbers were 889 rw hp & 973 rw torque. Second pull made 841 rw hp & 920 rw torque. Congrats Tom and have fun with the Viper guys up in Dallas.