Quote:
Originally Posted by SoCal Rebell
Particuarly the ACR (if there is any difference), the frame rails are so far towards the middle of the car I cannot get the jack to it. The Gen2 frame rails were much closer to the outside, had a Gen2 low profile jack also.
|
Ron, the front Jacking point is about 8" in from the side immediately behind the wheel wheel. It is a V shaped piece of metal about an inch and a half long, with the bottom of the v down, and the open section pointing towards the front. At the back, same thing, but about a foot forward of the wheel well. I find them easier to get at than the Gen 2.